Product
Autolad6G
Characteristic
● Lead-free compatible
● High Tg Halogen-free, Tg 220℃ (TMA)
● Low dk & Low Loss
● Lower X/Y/Z-axis CTE
Application Area
● ADAS parts
● Camera module
● Domain controller
● Computing units
● High voltage embedded chip
- Product Performance
- Product Certificate
- Data Download
| Items | Test Condition | Test Method | Unit | Typical Value |
|---|---|---|---|---|
| Tg | TMA | 2.4.24 | ℃ | 220 |
| DMA | 2.4.24.2 |
℃ |
260 | |
| Td | TGA(5% wt.loss) | 2.4.24.6 | ℃ | ＞420 |
|
T288 |
TMA | 2.4.24.1 | min |
＞60 |
|
Flammability |
C-48/23/50, E-24/125 | UL94 | Rating | V-0 |
| E-24/125+des | UL94 | Rating | V-0 | |
|
Voulme Resistivity |
Aftermoisture resistance |
2.5.17.1 |
MΩ/cm |
4.76×1010 |
|
E-24/125 |
2.5.17.1 |
MΩ/cm |
5.00×109 |
|
| Surface Resistivity |
Aftermoisture resistance |
2.5.17.1 |
MΩ |
1.84×1010 |
|
E-24/125 |
2.5.17.1 |
MΩ |
5.00×109 |
|
| Arc Resistance |
D-48/50+D-0.5/23 |
2.5.1 | s | 181 |
|
Dielectric Breakdown |
D-48/50+D-0.5/23 |
2.5.6 | kV | 45+kV NB |
| Dielectric Constant | C-24/23/50,RC=50%/70% (1GHz) | 2.5.5.9 | - | 4.0/3.5 |
| C-24/23/50, RC=50%/70% (10GHz) | 2.5.5.5 |
- |
3.92/3.53 | |
| Dissipation Factor |
C-24/23/50, RC=50%/70% (1GHz) |
2.5.5.9 | - | 0.0040/0.0050 |
|
C-24/23/50, RC=50%/70% (10GHz) |
2.5.5.5 | - |
0.0070/0.0075 |
|
| Thermal (Unetched) |
288℃, solder dipping |
2.4.13.1 |
- |
Pass |
| Thermal (Etched) |
288℃, solder dipping |
2.4.13.1 |
- |
Pass |
|
Peel Strength |
A, T oz RTF | 2.4.8 | N/mm | 0.65 |
| Peel Strength |
125℃, T oz RTF |
2.4.8 | N/mm | 0.60 |
|
Storage Modulus (LW) |
A | 2.4.24.2 | GPa | 28 |
| Storage Modulus (CW) | A | 2.4.24.2 | GPa | 27 |
|
Water Absorption (Before Tg) |
D-24/23 | 2.6.2.1 | % | 0.15 |
| CTE Z-axis | TMA (Before Tg) | 2.4.24c | ppm/℃ | 25-30 |
| TMA (After Tg) | 2.4.24c | ppm/℃ | 90-120 | |
| TMA (50-260℃） | 2.4.24c | % | 1.2 | |
| CTE X/Y-axis | TMA (Before Tg) | 2.4.24.5 | N/mm | 8-10 |
| Thermal conductivity | ASTM-D5470 | A | ppm/℃ | 0.59 |
| CTI | IEC60112 | A |
Rating |
PLC3 |
Remarks:
Remarks: 1. All the typical value is based on the1.0mm specimen. (*) is based on 0.10mm(1x2116) specimen.
2. All the typical value listed aboveis for your reference only, please turn to Shengyi Technology Co., Ltd fordetailed information, and all rights from this data sheet are reserved byShengyi Technology Co., Ltd.